Several years ago I put together a web site devoted strictly to model rocketry. One of the most popular pages was an introduction set up in question and answer format. Looking back on it, I can see that we've come a long way since those early days. I've copied that page into the extended entry, and added links where I could. more...

Posted by: Ted at 05:18 AM | category: Rocketry Resources
Comments (3) | Add Comment
Post contains 3368 words, total size 20 kb.

If you click on the extended entry, you'll find a picture of the common rocket motors that Mookie and I fly, to give you an idea of the range available. The 3.5" diskette in the background gives some scale. These are commercially available motors of three basic types.

The back row, from left to right:
Quest MicroMaxx, about 1"x.25" diameter.
Estes mini-engine, 13mm diameter.
Estes standard engine, 18mm diameter.
Estes "D" engine, 24mm diameter. These first four can be purchased in a lot of Wal-Mart type stores, as well as some craft stores. They all use a kind of black powder for propellant.

AeroTech "E" engine, 24mm diameter.
AeroTech "F" engine, 29mm diameter.
AeroTech "G" engine, 29mm diameter. These three all use Ammonium Perchlorate based propellant. In general, each 'letter' is twice as powerful as the one before.

Second row:
Two Dr. Rocket Reloadable Motor Casings for "H" motors. For these, you buy reload kits that provide solid slugs of Ammonium Perchlorate propellant and all of the necessary parts to assemble the motor. The casing on the left holds one more slug than the one on the right, so it's the more powerful motor. The casing on the right is a fully assembled motor. There's no danger here, because the motors need to be electrically ignited to fire. These are both 29mm in diameter.

Front row:
This is the motor for the Air Munuviana. It's a RATT-works "H", again in 29mm diameter. The reason for the length is that this is a hybrid motor, and a tank for nitrous oxide is incorporated into the design. The fuel is a slug of PVC plastic. I've designed the Air Munuviana to handle up to "J" motors and the motor mount will accept motors up to 38mm in diameter.

A little about the diameters. Standard diameters for rocket motors are 10.5mm, 13mm, 18mm, 24mm, 29mm, 38mm, 54mm, 75mm, 98mm, 3 inch, 4 inch and 6 inch. As you can see, I still fly at the smaller end of the range, but I'm slowly working my way up. [insert Tim Allen grunting noises here] more...

Posted by: Ted at 01:48 PM | category: Rocketry Resources
Comments (1) | Add Comment
Post contains 350 words, total size 2 kb.